Often we strive to build a new home but the very fact that the construction of today is not reliable at all brings us down.
In fact, most of the structures reveal marks of wear and tear way before they are assumed to be showing up with them, is clearly an obvious thing to be concerned.
However, if you will go with the best TMT bars India, you shall simply stay out of all your worries regarding the durability of the construction. But, you will definitely not shirk your responsibilities of verifying with the foundation of your house to rest assured.
So, here lies a handful of measures at which you might just throw in a glance or two to anchor your foundation the right way promising the endurance of some long and hard years.
The All-Important Selection of the Site
The site is really the most essential element of construction. Prior to buying a plot, you must verify with the conditions of the soil, location of the site and the traits of the ground.
Most of the areas require special attention for strengthening the piece of land. This can be noticed if the soil is weak and not supporting the weight of construction. Furthermore, the ground can, at times, be extremely porous and/or inviting instances of water logging.
So, contacting a Geotechnical Consultant / Structural Engineer would definitely be promising.
Proper Works of Excavation
Carrying out proper excavation works comes right next in terms of significance if you have plans of building a new house. Surveys would need to be extensive and diligent in order to obtain a proper layout on the ground. It is highly recommended that you must reach out to an experienced contractor for these works.
Treatment of Termites
Treating the soil surrounding the foundation of your building to chemically to oust the termites, which might be the formidable enemies of construction, is to be done right away. Besides, you should always approach an agency specialised in these works. You must also check that the agency should be among the members of the Indian Pest Control Association.
A Firm Layer For Stability
Another important thing that you should reassure is the compaction of the excavated top layer of the soil. Once you are done with it, you should then lay a brick flat soiling on its top. Now again, you must lay another thin layer of concrete above it.
This step will guarantee you a robust base to lay the RCC (Reinforced Cement Concrete) work, thus, holding the moisture deposited on the footing without a risky soaking of the soil.
These are some of the easiest steps to overlook and if done so, can wreak havoc. Eager in Constructing Your Own Home? Some Mistakes You Should Avoid can help you further on, if you are looking to build a strong home to live in.
READ ALSO OUR NEW UPDATES
- The Growth of Indian Steel Industry
- Use of Steel in the Automotive Industry
- 5 Construction Site Safety Tips to Ensure Workers Stay Safe and Healthy
- Properties and Interesting Facts about Steel
- Earthquake-Resistant Building Norms India
- Constructing Earthquake-resistant Structures in India: Know How
- Limit Construction Cost with These Amazing Tips
- Industrial Uses of Steel
- Top Trends of the Construction Industry for 2019